The tube fittings offers the advantage of easy installation requiring significantly less effort than most other tubes, pipe, or weld fittings options, which reduces installer fatigue. It can be installed using standard tools and offers multiple-piece swaging options for assembly flexibility, such as the gaugable pre-swaging tool.
Tube adapters are designed to work with the tube fitting, allowing for connections between a tube fitting and various other end connection types. They can help eliminate difficult alignment issues and reduce the need to stock special elbows and tees. The installation procedure for tube adapters is similar to that of the tube fitting, making them easy to install.
| Quenched & Tempered | ASTM A537 CL.1 & 2 |
| Boiler Quality | SA 516 Gr. 70 |
| International Standards of Stainless Steel Sheets & Plates | ASTM A-240 ASTM A-480 ASME SA-240 BS EN 10088-2 BS EN 10028-7 EN 10088-1 EN 10088-1 ISO 15510 |
| Tolerances (width/ thickness) of Stainless Steel Sheets & Plates | EN 10259/ DIN 59382 EN 10131 ASME SA-240/15 Strips EN 10088 SA -240 Strips |
| Finish | HR No.1, 2B, BA, Matt, Matt 1 side PVC, BA 1 sidePVC, Chequered |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Coil, Flat |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling Polish, Rolling Cutting Bending Forging Minor Fabrication etc |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JSW, TISCO, USCO, BACSTEEL IMPORTED material |
| Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
| Material Type | Grades |
| Mild Steel | ASTM A36, ASTM A283, IS 2062, EN 10025-2 |
| Carbon Steel | ASTM A516, ASTM A517, ASTM A285, ASTM A515, EN 10028-2 |
| High-Strength Low-Alloy (HSLA) Steel | ASTM A572, ASTM A588, ASTM A709, EN 10025-6 |
| Abrasion-Resistant Steel | HARDOX 400, HARDOX 450, HARDOX 500, Abras 400, Abras 450, SAIL HARD 400, SAIL HARD 500 |
| Boiler Quality Steel | ASTM A533, ASTM A534, ASTM A537, ASTM A547, EN 10028-2 |
| Pressure Vessel Steel | ASTM A285, ASTM A299, ASTM A516, ASTM A561, EN 10028-3 |
| Structural Steel | ASTM A572, ASTM A588, ASTM A992, EN 10025-2, EN 10025-3 |
| Stainless Steel | Stainless Steel 304, Stainless Steel 316, Stainless Steel 310, Stainless Steel 321 |
| Duplex Stainless Steel | Duplex Stainless Steel 2205, Duplex Stainless Steel 2507 |
| Alloy Steel | ASTM A387, ASTM A588, ASTM A404, ASTM A709, EN 10028-2 |
| Tool Steel | AISI D2, AISI O1, AISI A2, AISI H13 |
| Aluminum | 5052, 6063, 6061, 7075 |
Bulkhead tube fittings and adapters are designed to facilitate a connection between two sections of a partition. They are available in various sizes and connections to suit your specific application.
Tube fitting caps and plugs are available in a range of materials and sizes to enable leak-tight sealing and enhanced system safety in a range of applications.
Female connector tube fittings, available in a range of materials, sizes and configurations, deliver a leak-tight seal that is resistant to vibration fatigue.
Fusible tube adapter fittings enhance the overall safety of your industrial fluid system by releasing pressure into the atmosphere at a given temperature.
Low dead volume tube fittings are designed to enhance the overall efficiency of your industrial fluid system, even in challenging environments.
Male connector tube fittings, available in a range of materials, sizes and configurations, deliver a leak-tight seal that is resistant to vibration fatigue.
Browse mud dauber fittings (vent protectors) designed with a mesh-wire screen to prevent insects and other foreign objects from clogging or damaging systems.
Port connectors enable fitting-to-fitting connections, offer consistent gaugability upon installation and are easy to disconnect and retighten.
Tube fitting reducers, straights and tees are available in a variety of materials and provide easy installation and consistent gaugability.
Socket weld tube fittings enable proper alignment in small-bore fluid systems. Available in multiple sizes and configurations to fit your application.
Explore tube fitting replacement parts and accessories -- front ferrules, back ferrules, nuts, gaskets, o-rings, gap inspection gauges, wrenches -- and more.
Tube adapter straights, elbows and tees allow for fitting-to-fitting connections between a tube fitting and a variety of other end connection types.
Tube fitting union straights, elbows, tees, and crosses in a variety of materials and sizes provide excellent vibration fatigue resistance and tube support.
Check out our zero-volume tube fitting reducers, designed to effectively enhance the overall efficiency of your industrial fluid system.
