Inconel is a family of nickel-based superalloys known for their high strength, excellent resistance to corrosion, and outstanding performance at high temperatures. Inconel alloys are widely used in aerospace, chemical processing, and other high-temperature applications. Here is a brief description of Taksh Steel India's Inconel pipe, tube, flange, fastener, fittings, and round bar range:
| Sheets & Plates Specifications | ASTM B168 / ASME SB168, BS EN 10088-2, EN 10028-7, IS 6911 |
| Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc. |
| Inconel Sheets & Plates Size Range | Cold rolled ASME SB168 Grade Inconel Sheet 0.5–6.4 mm Hot rolled ASME SB168 Grade Inconel Sheet 3.0–8.0 mm |
| Inconel Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc. |
| Inconel Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc. |
| Inconel Sheets & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Inconel Sheets & Plates | ASTM A480, ASTM A959, ASME B1, EN ISO 9445, EN ISO 18286, EN 10051, EN 10088-1, EN 10088-2, ISO 15510 |
| Tolerances (Width / Thickness) of Inconel Sheets & Plates | EN 10258 / DIN 59181, EN 10051 ASME SB168 Inconel Strips, EN 10088 SA-240 Strips |
| Finish of Inconel Sheets & Plates | 2B, 2D, BA No.(B), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN, Mesh with Plastic Coated, No.1 finish hot rolled, 1D, 2B, No.4 BA, BK, Satin, Hairline, Brush, Mirror, etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Clad Plate, Coil, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), Soft Annealed, Descaled, Tread Plate, Sheared, Annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication, etc. |
| Inconel Grade | Ni | Cr | Fe | Mo | Nb+Ta | Cu | Al | Ti | Si | C | S |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 600 | ≥72.0 | 14.0–17.0 | 6.00–10.0 | — | — | ≤0.5 | — | — | ≤0.5 | ≤0.15 | ≤0.015 |
| 617 | ≥44.5 | 20.0–24.0 | ≤3.0 | 8.0–10.0 | — | ≤0.5 | 0.8–1.5 | 0.3–0.6 | ≤1.0 | ≤0.15 | ≤0.015 |
| 625 | ≥58.0 | 20.0–23.0 | ≤5.0 | 8.0–10.0 | 3.15–4.15 | ≤0.5 | ≤0.4 | ≤0.4 | ≤0.5 | ≤0.1 | ≤0.015 |
| 690 | 58–63 | 27–31 | 7–11 | — | — | — | — | — | — | — | — |
| 690 (Nuclear Grade) | 58–63 | 27–31 | 7–11 | — | — | ≤0.50 | — | — | ≤0.50 | — | — |
| 718 | 50.0–55.0 | 17.0–21.0 | Balance | 2.8–3.3 | 4.75–5.5 | ≤0.3 | 0.2–0.8 | 0.65–1.15 | ≤0.35 | ≤0.08 | ≤0.015 |
| X-750 | ≥70.0 | 14.0–17.0 | 5.00–9.00 | — | 0.7–1.2 | ≤0.5 | 0.4–1.0 | 2.25–2.75 | ≤0.5 | ≤0.08 | — |
All values are % by mass. "—" indicates the element is not controlled / not specified for that grade.