Low-carbon steel typically contains between 0.04% and 0.10% carbon and falls into the largest category of carbon steel. It can take on various shapes, such as flat sheets and structural beams, and its composition can be adjusted to achieve specific properties. Low-carbon steel is known for its flexibility, malleability, and softness, and is commonly used to make steel bars, stamping, resistant components, and specific steels. Through the carburizing process, the surface hardness of low-carbon steel can be enhanced, making it more resistant to abrasion and further increasing its strength.
| Sheets & Plates Specifications | ASTM A283 / ASME SA283, BS EN 10088-2, EN 10028-7, IS 6911 |
| Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc. |
| Carbon Steel & Plates Size Range | Cold rolled ASME SA283 Grade Carbon Steel 0.5–4.4 mm Hot rolled ASME SA283 Grade Carbon Steel 3.0–8.0 mm |
| Carbon Steel & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc. |
| Carbon Steel & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc. |
| Carbon Steel & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Carbon Steel & Plates | ASTM A480, ASTM A959, ASME B1, EN ISO 9445, EN ISO 18286, EN 10051, EN 10088-1, EN 10088-2, ISO 15510 |
| Tolerances (Width / Thickness) of Carbon Steel & Plates | EN 10258 / DIN 59181, EN 10051 ASME SA283 Carbon Strips, EN 10088 SA-240 Strips |
| Finish of Carbon Steel & Plates | 2B, 2D, BA No.(B), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN, Mesh with Plastic Coated, No.1 finish hot rolled, 1D, 2B, No.4 BA, BK, Satin, Hairline, Brush, Mirror, etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Clad Plate, Coil, Foils, Plain Sheet, Flat Shim, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), Soft Annealed, Descaled, Tread Plate, Sheared, Annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed Pickling, Rolled, Rolling, Cutting, Bending, Forging, Minor Fabrication, etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN POSCO, JSCO, TISCO, LISCO, BAOSTEEL, Imported Brand |
| Grade Specification | Carbon Steel: ASTM/ASME A234 WPB / A860, MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low Temperature Steel: A420 WPL2 / A420 WPL6 |
| Type of Carbon Steel Pipe Fittings | Seamless / Welded / Fabricated |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Range | ½" NB to 48" NB in Sch 10s, 40s, 80s, 160s, XXS |
| Dimensions | ANSI/ASME B16.9, BS 1B, MSS-SP-43 |