We offer a wide variety of industrial steel sheets and plates, as well as stainless steel sheets and plates. These products are made from high-quality raw materials and manufactured according to international quality and safety standards. They are available in various dimensions and at competitive prices. Our products are commonly used in the construction and engineering industries.
| Quenched & Tempered | ASTM A537 CL.1 & 2 |
| Boiler Quality | SA 516 Gr. 70 |
| International Standard of Stainless Steel Sheets & Plates | ASTM A480 ASTM A959 ASME II D EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) of Stainless Steel Sheets & Plates | EN 10258 / DIN 59381 EN 10151 ASME SA240 SS Strips EN 10088 SA -240- Strips |
| Finish | HR No.1, 2B, BA, Matt, Matt+1 side PVC, BA + 1side PVC, Chequered |
| Hardness | Half Hard, Soft, Hard Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Coils, Foils |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAD STEEL IMPORTED material |
| Profiling | Plasma Plane Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
| Material Type | Grades |
|---|---|
| Mild Steel | ASTM A36, ASTM A283, IS 2062, EN 10025-2 |
| Carbon Steel | ASTM A516, ASTM A537, ASTM A285, ASTM A612, EN 10028-2 |
| High-Strength Low-Alloy (HSLA) Steel | ASTM A572, ASTM A588, ASTM A709, EN 10025-6 |
| Abrasion-Resistant Steel | HARDOX 400, HARDOX 450, HARDOX 500, Abrex 400, Abrex 450, SAIL HARD 400, SAIL HARD 450 |
| Boiler Quality Steel | ASTM A515, ASTM A516, ASTM A387, ASTM A537, EN 10028-2 |
| Pressure Vessel Steel | ASTM A285, ASTM A299, ASTM A455, ASTM A612, EN 10028-3 |
| Structural Steel | ASTM A572, ASTM A588, ASTM A992, EN 10025-2, EN 10025-3 |
| Stainless Steel | Stainless Steel 304, Stainless Steel 316, Stainless Steel 310, Stainless Steel 321 |
| Duplex Stainless Steel | Duplex Stainless Steel 2205, Duplex Stainless Steel 2507 |
| Alloy Steel | ASTM A387, ASTM A588, ASTM A606, ASTM A709, EN 10028-2 |
| Tool Steel | AISI D2, AISI O1, AISI A2, AISI S7, H13 |
| Aluminum | 5052, 5083, 6061, 7075 |
Range : 0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75.
Stainless Steel : ASTM / ASME SA 240 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316 Ti, 317, 317L, 321, 321H, 347, 347H, 409, 410, 410S, 430
Duplex Steel : ASTM / ASME SA 240 UNS NO. S 31803, S 32205, S 32550, S 32750, S 32760
Super Duplex : ASTM A240-UNS S31803/32205 (2205) Lean ASTM A240-UNS S32304 (2304) Super Duplex ASTM A240-UNS S32750 (2507)
Sheet and Plates Range : 5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75.
Nickel Alloy :
ASTM / ASME SB 162 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201)
ASTM / ASME SB 127 UNS 4400 (MONEL 400)
ASTM / ASME SB 434 UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 168 UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601)
ASTM / ASME SB 443 UNS 6625 (INCONEL 625)
ASTM / ASME SB 462 UNS 8020 (ALLOY 20 / 20 CB 3)
ASTM / ASME SB 424 UNS 8825 (INCONEL 825)
Sheet and Plates Grades : Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000
Form : Hastelloy Sheet, Hastelloy Coil, Hastelloy Strips, Hastelloy Plates, Hastelloy Circle, Hastelloy Ring
Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Standard : ASTM / ASME SB 168, ASTM / ASME SB 424, ASTM / ASME SB 443
Grades : Incoloy 800, Incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS
Type : Seamless / Erv / Welded / Fabricated
Standard : ASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751
• Petrochemicals Plants
• Oil Refineries
• Sugar Mills
• Fertilizers Plants
• Chemical Plants
• Pharmaceuticals
• Textile Machinery
Grades : Monel 400, Monel k500
Type : Seamless / Erv / Welded / Fabricated
Form : Round, Square, Rectangular, Hydraulic etc.
Length : Single Random, Double Random & Cut Length
End : Plain End, Beveled End, Threaded
Sheet and Plates Specifications :
1) Hot and cold rolled, Gr1– Gr23
2) Thickness 0.3mm - 40mm
3) Length 6000mm
4) ASTM B265, ASTM 4911, F67, F136
Material titanium and titanium alloys :
Pure Titanium Grade : GR1, GR2, GR3, GR4
Titanium Alloy Grade : GR5 (6% Al, 4%V)
GR6 (5% Al, 2.5%Sn)
Gr7 (Titanium + Pd)
Gr9 (3% Al, 2.5%V)
Gr10 (11.5%Mo, 6%Zr, 4.5%Sn)
Gr11 (Titanium + Pd)
Gr12 (0.3%Mo, 0.8% Ni)
Material : HARDOX wear-resistant steel
Grades : HARDOX 400, HARDOX 450, HARDOX 500, HARDOX 600
Thickness Range : 3 mm to 130 mm
Length : Up to 16000 mm
Standard : SSAB proprietary standards
Applications : Mining, quarrying, recycling, construction, agriculture, forestry, transport sectors.
Material : High-strength wear-resistant steel (e.g., Rockstar series)
Grades : Rockstar 400, Rockstar 450, Rockstar 500, Rockstar 550, Rockstar 600, etc.
Thickness Range : 6 mm to 100 mm
Length : Up to 12000 mm
Standard : Manufacturer's proprietary standards (e.g., Tata Steel standards)
Applications : Mining, quarrying, recycling, construction, agriculture, forestry, transport sectors.
Material : Abrasion-resistant steel (Abrex series)
Grades : Abrex 400, Abrex 450, Abrex 500, Abrex 600
Thickness Range : 6 mm to 100 mm
Length : Up to 12000 mm
Standard : Manufacturer's proprietary standards (NSSMC standards)
Applications : Mining, quarrying, recycling, construction, agriculture, forestry, transport sectors.
Material : Abrasion-resistant steel (SAIL HARD)
Grades : SAIL HARD 200, SAIL HARD 400, SAIL HARD 450
Thickness Range : 6 mm to 60 mm
Length : Up to 12000 mm
Standard : Manufacturer's proprietary standards (NSSMC standards)
Applications : Mining, quarrying, recycling, construction, agriculture, forestry, transport sectors.
Material : HARDOX wear-resistant steel
Thickness Range : 1 mm to 300 mm
Standard : IS 2062, ASTM A36, ASTM A283, JIS G3101, etc.
Tolerance : As per standard specifications
Applications : Construction, automotive, shipbuilding, general fabrication, industrial equipment
Specifications : Tantalum sheet, Tantalum plane, Tantalum foil
Grade : RO5200, RO5400, RO5252, RO5255
Standard : ASTM B708-98
Size : T0.1-10.0mm
We are a factory specializing in the manufacture and export of Tantalum and Niobium products for more than ten years, including foil tubes, rods, wire, sheets, planes, rods, strips, targets and so on We can supply the best quality and low price. Tantalum sheets, Tantalum- tungsten alloy sheets ( Ta 2.5W, Ta 10W )
Purity : 99.95% min or 99.99% min conformity with ASTM B708 98
We offer wide variety of industrial steel sheets, which are fabricated from finest quality of raw materials. Manufactured as per the international quality and safety standards, we offer these products in different dimensions and at highly competitive prices. These products are mostly applied in construction and engineering industry.
| Size: | 0.8mm to 4mm thk. in 1000 upto 2000 mm Width & 2000 upto 6000 Length |
| Hardness: | Soft, Half Hard, Half Hard, ¼ Hard, Full Hard & Spring Hard |
| Finish: | CR, 2D, 2B, BA |
Taksh Steel India is involved in manufacturing and exporting high-quality sheets, plates, and coils that have extensive applications in various industries.
| Size: | 5mm to 100 mm thk. In 1000 upto 2000 mm Width & 2000 upto 8000 Length |
| Hardness: | Soft, Half Hard, Half Hard, ¼ Hard, Full Hard & Spring Hard |
| Finish: | CR, 2D, 2B, BA |
Stainless steel foils and shims are thin, flat sheets or strips made from stainless steel. They are commonly used in various industries and applications where precise spacing, alignment, or support is required.
| Size: | 0.01 mm thk. to 0.3 mm thk. in any width |
| Hardness: | Soft, Half Hard, Half Hard, ¼ Hard, Full Hard & Spring Hard |
| Finish: | CR, 2D, 2B, BA |
Taksh Steel India is a highly acclaimed manufacturer, exporter, supplier, wholesaler, dealer, retailer, shipper, and service provider of ferrous and non-ferrous metal products. In this regard, we offer sheets, plates, coil, strips, foils, and more
| Thickness Range: | 0.025 mm - 400 mm |
| Width: | Minimum 3.2 mm to maximum 2000 mm |
| Hardness: | Soft, Half Hard, Half Hard, ¼ Hard, Full Hard & Spring Hard |
| Finish: | CR, 2D, 2B, BA |